Advertisement
2 of 6
Step 2. Mark biscuit slots and bevel the legs
Step 2. Mark biscuit slots and bevel the legs
Reader's Digest

On the sides, mark biscuit slot centres 50mm and 325mm from each end. Position each side between two legs with their tops flush, then transfer the centre marks to the legs. Next, secure two pieces of scrap timber to a plywood square at right angles to make a jig, then clamp it to a mitresaw fence, cutting a 10° bevel to extend 75mm up from the base of each leg.

Advertisement

Never miss a deal again - sign up now!

Connect with us: