13 ways you’re shortening the life of your vacuum cleaner

Do a quick visual check for clogs to the hose and wand after every time you use your vacuum cleaner. Unclogging your hoses not only improves suction power, but it can help the vacuum run more efficiently and last longer. If you can’t reach the jammed debris with your hand, use a mop handle or a gardening stake to push it through. An easy test: After detaching the hose and wand, try sliding a coin through them. If it gets stuck, you know it’s clogged.

It’s easy to get lazy and leave the power cord out to get stepped on by family and pets. But by winding the cord into a tidy coil after vacuuming, you can prevent damage, while also avoiding potential hazards including electrocution for family pets or inquisitive crawlers who like to chew. If you don’t have time to wrap up the cord, at the very least, you should always unplug it.

Here are 13 silent signs your home is an unhealthy place to live.

Most vacuum cleaners have rotating brushes at the intake port that kick dust and dirt loose from the carpet so they can get sucked up by the air stream. But when hair, pet fur, or loose string gets trapped in the brushes, they can’t work as effectively. Using a small pair of scissors, gently cut through the debris to free up the brushes, then use a comb to smooth them out.

Here’s expert advice on how to clean your kitchen’s trickiest appliances.

Whether your vacuum uses a bag, canister, or cup, an overfilled unit will run less efficiently and not last as long. While it’s easy to tell when a bagless unit is full, it can be harder to tell when a vacuum bag needs replacing. If you notice a drop in suction, it could be a sign it’s full of lightweight, fluffy material such as pet hair. For maximum performance and to make your vacuum last longer, replace the bag or empty the canister or cup when it is half to two-thirds full.

Find out what professional cleaners do every day to keep their own homes spotless.

Each vacuum is different, but your manual should indicate how often filters need to be replaced or cleaned. Many vacuum models come with an accordion-shaped paper filter and a sponge-like ring filter. For units with washable filters, be sure to follow the washing guidelines from the manual. Of course, the frequency will vary depending on how often you vacuum and how messy your floors are. If the filter looks dirty, it’s time to switch it out or clean it.

Here are nine things house guests notice and 9 things to please stop worrying about.

This belt wraps around the beater brush allowing it to turn. If it’s not working correctly, the beater brush won’t loosen dirt and debris from the carpet fibres. By flipping the power-head over, you can glance at the belt, looking for tears or cracks. If the belt looks loose, that’s another sign it’s time for a new belt.

Most vacuum cleaners have different settings depending on the type of flooring you are cleaning, i.e. wood or carpet. If you’re using the wrong setting, this can render the vacuum cleaner less effective and may shorten the life of your unit. “Setting your vacuum on the lowest setting may not be the best option to get enough airflow for the suction action,” reports Angie’s List.

Attachments usually come with a storage spot, either on the vacuum itself or in a separate box or bag, yet it’s easy to get lazy. Sometimes, we leave a dusting brush or an upholstery tool on the side table instead of walking it down to the hall cupboard. Not that big of a deal, right? Until it gets lost or stolen by your puppy for her new chew toy. By storing the attachments together with the vacuum cleaner in a safe spot, parts are less likely to be damaged or get lost.

These home organising hacks could come in handy!

To stretch out the life of your vacuum cleaner, give the room a once-over. Move backpacks, socks, or clothing with drawstrings to prevent them from catching in the belt. While you can turn off the vacuum and pull them out, over time it could loosen the belt and shorten the life of your vacuum cleaner. Next, check for fallen food items like chips or cookies or small toys like building bricks. Scoop them before vacuuming the area.

This might seem really obvious, but sometimes we get into turbo-mode – pushing the vacuum beyond its limits. Then even when we smell smoke, we optimistically assume we can fit in just one more room before problem-solving. But prevention is key. “When stress to the motor is present, the motor heats up and usually burns the belt, causing smoke,” suggests Do It Yourself. They advise cutting the burnt belt off with scissors, then replacing it before continuing to vacuum.

Discover 10 cleaning mistakes that are making your home dirtier.